Stand: 19.03.12
Seite 21
KW Hydraulik GmbH
Tel.:
03675/42198-0
Köppelsdorfer Str. 132
Fax:
03675/42198-11
D-96515 Sonneberg
e-mail:
info@kw-hydraulik.de
Germany
Internet: www.kw-hydraulik.de
SSBZ
SSBZ
SSBZ
SSBZ
Then put the fixed cheek of the offsetting tool from above in the guiding-way of the
basic device that the noses of the fixed and movable offsetting cheeks are on
different sides.
Now lay the contact rail into the working-group (like in picture 3) and adjust the
height of the working-group with the hand-wheel that the contact rail is in a middle
position to the offsetting tool. At the height-scale of the basic device you can read
the distance between the working-plate and the piston-middle-axle.
The appliance is now ready (picture 19).
picture 19: offsetting tool in the SSBZ
The different strength of the materials could cause a small deviation between the adjusted
and the reached floor.