Stand: 19.03.12
Seite 7
KW Hydraulik GmbH
Tel.:
03675/42198-0
Köppelsdorfer Str. 132
Fax:
03675/42198-11
D-96515 Sonneberg
e-mail:
info@kw-hydraulik.de
Germany
Internet: www.kw-hydraulik.de
SSBZ
SSBZ
SSBZ
SSBZ
By putting together the dust protecting caps (picture 2) you can avoid that dirt gets into the
caps or the coupling. Dirt in the hydraulic system can cause operating-errors.
picture 2: put together the dust protecting caps
4.2
electrical connection
By using a hydraulic pump the common plug for remote control and optoelectronic sensor
has to be plugged in the remote control-socket of the pump (see also in the operating
manual of the pump). The optoelectronic sensor has to be fastened with the fix on the
basic device (picture 1).
Indication! The optoelectronic sensor is only used for bending-jobs. In all other jobs the,
in the direction of the tool pointing, front side of the holder has to end in a bundle with the
fix (see picture 1) because otherwise the pump does not start.