Diajekt Control CFC10
13
Status: 06/18/2014
The connection cable of the thermal element should be extended to maximally 20 m and a
suitable compensation cable should be used. The thermal element accessory is delivered with a
length of 2 m.
1.3.2.9 Connection Extension Module CE20 (optional)
This port is used for an extension module CE20. In a flue gas system with multiple fireplaces,
with more than two boilers, a CE20 has to be installed together with the control CFC10.
The extension module CE20 has ports for four additional boilers (release inlet and outlet).
Figure 10: Maximum configuration with extension module CE20
Please note that the set pressure at the measuring point has to be adequate to ensure that the
draught is sufficient at the far-off boiler.
