Diajekt Control CFC10
21
Status: 06/18/2014
1.7 U s e r Interface Set-Up
The DIAJEKT Control CFC10 has a user interface with an 8-line LCD display, four menu keys
and a status LED.
Figure 15: User interface
1.7.1 LCD-Display
The display is used to show the current information of the control. The following values are
displayed during standard operation:
• device information
• current differential pressure
• current CF output
• current set pressure
• error message
• firmware version
1.7.2 Control Panel
The control panel consists of four menu keys.
• Escape key „Esc‟ for ending the current action
• Up key „▲‟ for navigating upwards through the menu points
• Down key „▼‟ for navigating downwards through the menu point
• Enter key „
„
for confirming an action
