17
RU
EN
DE
PL
INSTRUCTION MANUAL
Install the lever (Fig. 6/item 1) by tapping the
lever on the connector (Fig. 6/item 2), until
the holes on the lever and on the flat bar are
aligned. Slide the pin in from above (Fig. 6/
item 3).
CAUTION: The lever is not ready for use immediately after removing the device from the
packaging.
Check that the piston valve body (Fig. 7/item 2) is equipped with an O-ring (Fig. 7/item 3) and connect it with
the lance (Fig. 7/item 1) by screwing in to obtain a tight connection.
1
2
Fig.6
Fig.7
1
3
2
Insert the strap in the centre of the hip belt twice through the
spacer starting from the top. Fasten the end of the strap with
a Velcro fastener.
Fig.5
