EN
PL
15
RU
DE
OPERATING INSTRUCTIONS
Attach the shoulder strap - adjust length as needed.
In order to depressurise the tank (fig. 1/pos. 8), pull the safety valve pin (fig. 4a/pos. 1) and hold it in this
position for at least 10 seconds, until the tank is completely depressurised.
1
The safety valve open
Fig.4a
The safety valve closed
Fig.4b
Fig.4c
Screw the pump off the head - to do this, lock the piston rod (fig. 5b/pos. 1) in the cylinder brackets (fig. 5b/
pos. 2). Unscrew the pump counterclockwise, holding the piston rod (fig. 5b/pos. 1).
The piston rod unlocked
Fig.5a
The piston rod locked
Fig.5b
2
1
Insert the strainer (fig. 6/pos. 2) to the head cup (fig. 6/pos. 1) and pour in water.
Remove the strainer (fig. 6/pos. 1) from the head cup (fig. 6/pos. 2).
Do not block or modify the safety valve.
Screw in the pump and operate the piston rod several
times (fig. 4c) in order for the safety valve to open
automatically (fig. 4a). If the valve operates correctly,
the valve pin (fig. 4a/pos. 1) will lift upwards (the valve
will open), which will be accompanied with the sound
of escaping air.
Fig.6
2
1
3
2
1
3
The valve closed
