KWE P
/N 3940
46 Ve
rsatronik
502 a
nd 502D
MODBUS G
atewa
y V1
.0 F
eb
2
014 Te
chni
ca
l i
nformation subj
ec
t to
ch
ange
w
ithout noti
ce
Mounting Versatronik Gateway—120VAC Unit
2
3
Installation
1. Mount Versatronik 502 Gateway in a
convenient location near the connected boiler
controls control. Remove cover by loosening
the two screws on either side of base to
release the cover.
2. Fasten base to wall using field-supplied
screws/fasteners.
3. Remove knockout and installed wire strain
relief or box connector. Removal of remaining
knockouts is required to make further
connections.
4. Once all of the 120VAC and low voltage
connections are complete and verified, reinstall
the cover from Step 1.
!
When extending wire there is the possibility of
exposure to electromagnetic interference. Avoid
running wires beside or near high voltage 120/240
VAC conductors. If proximity to high voltage
conductors cannot be avoided, use stranded, twisted
pair of shield design wire. Ensure that only one end of
the shielding is grounded.
Mounting Steps
1
4
1
WARNING