Touch Sense Test
Perform the following test prior to installation to make sure
your Kevo lock’s touch sensor is working correctly.
Remove the adapter ring from the exterior assembly and
set it aside.
2
Remove the exterior assembly, interior assembly and
batteries from the package.
1
Install 4 AA batteries into the battery pack.
x4
4
Remove the mounting plate, battery cover and battery pack
from the interior assembly.
3
Connect the exterior assembly to the interior by inserting the
exterior torque blade into the turnpiece shaft.
6
5
Lay the interior assembly on a flat surface, with the Kwikset
label facing down.
60685 / 01
