106 Chapter 14 - Memory management
106 V3.2
Memory management
Chapter 14
The instrument has a tuning memory with 199 program locations. The memory preview allows the
user to gain an overview of the tuning memory without having to access all memory locations or
having to make corresponding notes when saving. The memory preview is activated when saving
and accessing program locations and with some memory functions. The
↑/↓
key and the
←/→
keys can be used in increments of ten to scroll through the tuning memory.
Figure 14-1 Memory management
14.1
Saving
The receiver must first be tuned. You can access the ”SAVE” menu using
SAVE
. The instrument
searches the tuning memory for the first free location and suggests the user use this memory
location number for saving. Any other memory location between 0-199 can, naturally, be selected
using the keypad. The content of the memory location is displayed after each the memory number.
Press
SAVE
or
ENTER
to save. The instrument issues a warning if the desired memory location is
already occupied. If you want to overwrite the memory location, press
ENTER
or
SAVE
again.
14.2
Recalling
Press
RECALL
to open the ”RECALL” menu. The instrument will suggest memory location 1 when
the menu is opened for the first time after switching the instrument on. The memory location is
increased by 1 each time after opening the memory. This means the instrument will suggest
memory location 2 next time. Any other memory location can, naturally, be selected using the
keypad or the
↑/↓
keys (one memory location) –
←/→
keys (ten memory locations). Press the
RECALL
or
ENTER
keys again to open the memory. The measuring receiver then accepts the
settings from the memory. If the memory location is empty, the old settings remain unchanged.
