PARTS
Store
Timing of cleaning
Cleaning way
Kwun
Turn off the power, and do
not store in high temperature,
humidity or sun exposure
About 270 minutes of
interval work or serious
ash
Clean the surface with a soft cloth
Water
cube
Dump all the water, and do
not store in high temperature,
humidity or sun exposure
environment
Battery
Do not store in the
environment of high
temperature, humidity or sun
exposure and every 1.5
months to replenish
electricity, prevention of
over-discharge of the battery
-
-
Roller
brush
Do not store in high
temperature, humidity or sun
exposure
About 270 minutes of
interval work or serious
ash
Use a soft cloth to comb up and down and wind, do not wash with water
Crawler
belt
1. Place the wet rag on a flat surface.
2. Enter remote control mode through APP to move the device to drive the track cleaning.
1. Overhead fixed equipment.
2. Press wet rag or foam onto the track.
3. Move the track in remote control mode through APP to drive the track cleaning.
Self-
cleaning
module
Work about 60min
intervals or replace the
module process
1. Scraper the dust on the brush along the direction of the brush hair, and use a hair dryer to help
blow the dust to complete the simple cleaning of the brush.
2. Knock the brush base, shake off the dust, and then wipe with a soft cloth to complete the
simple cleaning of the brush base.
About 270 minutes of
interval work or serious
ash
1. Scraper the dust on the brush along the direction of the brush hair, and use a hair dryer to help
blow ash.
2. Flush or soak the brush.
3. Use a dry cloth or sponge to press to absorb moisture, and be careful not to twist the bristles.
4. The brush hair should be naturally air-dried downward to avoid direct sunlight to complete deep
cleaning with the brush.
1. Flush or soak the brush base.
2. Use a dry rag or sponge to dry the brush holder.
3. Place in the air to dry or use a hair dryer to dry, complete the deep cleaning of the brush base.
7. Daily cleaning and maintenance
29
