3. Introduction
3.6 Water Cube (Accessories)
3.6.1
Water Cube connection
1. Fix the rotating table module base of the Rubik's Cube to the mounting hole
of the shell through M4 captive bolts.
2. Fix the pipe support frame of the Rubik's Cube nozzle module to the roller
brush support using M4 screws and nuts.
3. Connect the external water pipe to the pipe (M14 internal thread) on the
upper end of the rotating table module through a quick connector.
3.6.2 Tool
Tightened or Adjusted parts
Tool
U-bolt
10 Open end wrench
Fixed screw nut for pipeline
support frame
7 Open end wrench M4
hexagon socket wrench
Fixing screws for PVC pipe
M8 inner hexagon wrench
Set screws and nuts for PVC
pipe supports
8 Open end wrench M5 Inner
hexagon wrench
One M5 inner hexagon wrench, one M8 inner hexagon wrench,
one 5.5-7 open end wrench, one 8-10 open end wrench.
U-bolt
Fixing screws for
PVC pipe
3.6.4 External device
Purchase quick connection connection, water pipe
and hydraulic press by user.
Collocation demonstration:
Fittings with M14 external thread to M22 external thread
Water pipe with M22 external thread quick connection
hydraulic press
3.6.3 Tightening and adjustment
PVC pipe
support
Pipeline
support frame
Hydraulic press
Rated power 900W
Rated pressure 100bar
Inner φ is about 14.8 mm
External M22*1.5(inner hole 15mm) to
external 14*1.5 conversion connector
4
