KXDMOTO.de
Safety warning
1. This vehicle is not a toy.
2. Rider under16 years old must use this product under adult’s supervision
3. Children must be trained before driving. This is very important.
4. Be sure of children's ability to forbid the risk. This is very important.
5. Children must understand the manual and the importance of warnings on the manual.
6. User must read the owner manual carefully and understand the content of the manual.
7. Incorrect operation of this ATV will result serious injury or even death.
8. Age limit warning.(See aluminum warning plate on the ATV)
9. This product is not intended for OFF-ROAD use. Please get off the vehicle and walk with it when crossing
the roads.
10. Never ride with more than one person.
11. Never attempt to operate this vehicle while under the influence of alcohol or drugs, avoid injury or death.
12. Please control the speed, do not drive at excessive speed.
13. The vehicle is not allowed to use in the adjustment or maintenance period.
14. Be sure the vehicle is in a good condition before using it.
15. Do not modify the vehicles or change the spare parts. This is unsafe and illegal.
16. The accelerating installation of the vehicle has been set. Users should not adjust it, which may result in
serious injuries and death.
17. Before riding ,please wear the safety helmet
gloves
protection dress and footwear ,to ensure the
safety .
18. It is necessary to receive training from importer or retailer, and learn the operation skills.
19. Learn local laws and regulations of ATV driving from the retailers.
20. It's easy to be burned by break after using the vehicle for a long time.
21. Although the vehicle is with safety designed measures, harms still can not be avoided.
Please read the warning labels on the
vehic
le carefully, and understand them fully.
1. Warning caution label includes important safety information .
2. User must understand the content of labels completely, and carry out.
3. Make sure all the labels are put on the vehicles already.
4. When finding the labels are not clear or fall off, please ask dealers for them to stick on the vehicles to
ensure the integrity of all the labels.
Compliance with the laws and directives
2006/42/EC
MACHINERY DIRECTIVE
2004/108/EC
EMC DIRECTIVE
97/68/EC
ENGINE POLLUTANT DIRECTIVE
Assembling guide
1. Place packing box on the flat ground, then open it.(with the scissors or cutter)
2. Use 10# open-end wrench and 6# allen wrench to apart the packing metal.
KXDMOTO.de
KXDMOTO.de
1
st
step
: Please install steering linkages, tighten nut with 25N.m force, and adjust the balance of the left and
the right.
2
nd
step
: Please install rear shock absorbers, and tighten nuts on both sides with 25N.m force.
3
rd
step
: Please install the front tires (make the tread pattern and cycle valve outside),and tighten nuts with
force between 35N.m ~ 45N.m.
4
th
step
: Please install the rear tires (make the tread pattern and cycle valve outside),and tighten nuts with
force between 50N.m ~ 60N.m.
5
th
step
: Please install handlebar (adjust to proper angles), and tighten nuts with force between 15N.m ~
25N.m.
6
th
step
: Please install bumper and accessories, and tighten nuts with force between 15N.m ~
25N.m.Connect battery cables. When you connect battery cables, electric lock is in the sate of "OFF”.
Positive first, then negative. Disassembly is opposite.
If you fail to understand the instruction, please contact with the local retailers and get professional
confirmation after installation.
Loading Adjustment (This step should be checked regularly to ensure safety and convenience):
Check the toe-in of front tire, make sure the front center distance is 5-10mm shorter than the rear center
distance.
Make sure the connection is ON, and no part is OFF. So vehicle can be started at anytime.
Adjust the Chain
: Use the index finger, to press lightly the middle position between power output sprocket
and rear sprocket. The best condition should be pressed 15mm to 20mm. If it is not in this range, please
adjust the chain adjuster. (Please note: The chain adjuster should be adjusted at the same time to ensure
the balance of both side).To loosen the fasten nuts of chain adjuster first, and then unscrew or screw nuts to
be best condition. Finally, make the nuts of chain adjuster screwed .
KXDMOTO.de
