In the following cases, please immediately shut down your power supply and
contact your Kyland representative:
Note
：
The security of any system merged with this device is the responsibility
of the assembler.
The following information applies when operating this device in hazardous
locations:
Suitableforuse in Class I, Division 2, Groups A, B, C and D Hazardous
Locations, ornonhazardous locations only.
Cet appareillage est utilisable dans les emplacements de Classe I, Division 2,
Groupes A, B, C et D, ou dans les emplacements non dangereux seulement.
WARNING:
EXPLOSION HAZARD
AVERTISSEMENT:
RISQUE D'EXPLOSION
Water gets into the equipment.
Equipment damage or shell damage.
Equipment operation or performance has abnormally changed.
The equipment emits odor, smoke or abnormal noise.
●
●
●
●
Do not disconnect equipment while the circuit is live or unless the area is
known to be free of ignitable concentrations.
Substitution of any component may impair suitability for Class I, Division 2.
●
●
Avant de deconnecter l'equipement, couper le courant ou s'assurer que
l'emplacement est designe non dangereux.
La substitution de composants peut rendre ce materiel inacceptable pour
les emplacements de Classe I, Division 2.
●
●
