3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING
HANDLEBAR LOCK
ON :At this position, power is connected to start the
engine. The key cannot be taken out.
OFF :At this position, power is cut off and the engine
stops. The key can be taken out.
LOCK :At this position, the steering handlebar is locked.
The key can be taken out
Locking Method
To lock the handlebar, turn the steering handlebar all the way
to the left and then press and turn the ignition switch key to
the "LOCK" Position.
Unlocking Method
Turn the key to "OFF" and the lock is released
automatically.
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to "LOCK" during riding,
or the handlebar will be out of control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
CAUTION:
6
