11
TEMPERATURE GAUGE: It indicates the temperature of
engine cooling water.
During riding, the temperature gauge needle should always
move under the red mark. If the needle points the red mark,
check the coolant level in the eye hole.
OIL CHANGE INDICATOR LIGHT: The indicator light
will tell you the time of oil change. Usually, the display is
in green color and it will turn red when oil change is
required. Although the display color is still green upon the
first change of a riding of 300km, it is necessary to insert
the key into the release hole to release it.
Release Hole
(9) REAR CUSHION
To suit scooter behaviour to load condition rear cushion
could be adjusted in spring preload.
Using the special tool in tool kit change the preload.
It is possible to adjust rear cushion in three positions:
position "soft"
position "medium"
position "hard"
When you adjust rear cushion, the spring preload of rear
cushions on either side must be the same.
