(10) HORN/LIGHTS INSPECTION
Turn the ignition switch "ON" and press the horn button to
check if it sounds.
Headlight/Taillight Inspection:
Start the engine and turn on the headlight switch to check
if the headlight and taillight are good and check the light
shells for dirt and damage.
Stoplight Inspection:
Apply the front and rear brake levers respectively to check
if the stoplight is good. And also check the stoplight shell
for dirt and damage.
Turn Signal Light Inspection:
Headlight
Taillight/ Stoplight
Turn signal light
Horn button
Operate the turn signal switch to make sure that the
right/left front and rear turn signal lights can flash and click.
Also check the light shells for dirt and damage.
Replace any dirty or damaged lights with new ones to
avoid danger during riding.
CAUTION:
18
