14.
DOWNTOWN 125 i FUEL SYSTEM (Auto Control Fuel Injection System)
14-9
CELP Failure Code Chart(3)
Blink
Failure
Codes
Fault description
Priority
Fault management
11
P0350
Ignition coil or electric
circuit malfunction
2
1. Check if the connector of ignition coil is loosen.
2. Check if the ECU send signal to Ignition coil.
3. Check if the power source and resistance is malfunction.
12
P0230
Fuel pump relay or electric
circuit malfunction
2
1. Check if the connector of relay is loosen.
2. Check if the ECU send signal to relay.
3.
Check the fuel pump relay resistance
13
P0219
Engine speed is over than
top speed
2
Check if the belt of CVT is broken.
14
P1560
Sensor don’t receive power
source from ECU
2
1. Check if ECU output DC5V to sensor.
2. Check if the power source of all sensor is DC5V.
3. Replace a new ECU if the CELP still blinks even the output power
source of ECU is normal.
15
P0700
Engine starting speed
exceed CVT speed limited
2
1. Check if the throttle wire locked.
2. Check if the position of throttle screw is correct.
3. Check if the belt of CVT is broken.
16
P0115
Engine temperature sensor or
electric circuit malfunction
2
1. Check if the connector of sensor is loosen.
2. Check if ECU pin is broken.
3.Check if the resistance of sensor is malfunction.
17
P1561
Temperature gauge electric
circuit malfunction
2
Don’t use it at present.
Cortesia de/ Courtesy of: www.batmotos.com
Cortesia de/ Courtesy of: www.batmotos.com
