1-7
No contact !
After clamping, check each wire to make
sure it is secure.
Do not squeeze wires against the weld or
its clamp
After clamping, check each harness to make
sure that it is not interfering with any moving
or sliding parts.
When fixing the wire harnesses, do not make
it contact the parts which will generate high
heat.
Route wire harnesses to avoid sharp edges
or corners. Avoid the projected ends of bolts
and screws.
Route wire harnesses passing through the side
of bolts and screws. Avoid the projected ends
of bolts and screws.
1. GENERAL INFORMATION
- 7 -
DOWNTOWN 125i
Cortesia de/ Courtesy of: www.batmotos.com
Cortesia de/ Courtesy of: www.batmotos.com
