Do you understand the
instrument?
Is the instrument
set correctly?
Remove Rust !
1-9
Wire harnesses routed along with handlebar
should not be pulled tight, have excessive
slack or interfere with adjacent or surrounding
parts in all steering positions.
When a testing device is used, make sure to
understand the operating methods
thoroughly and operate according
to the operating instructions.
Be careful not to drop any parts.
When rust is found on a terminal, remove
the rust with sand paper or equivalent before
connecting.
1. GENERAL INFORMATION
- 9 -
After routing, check that the wire harnesses
are not twisted or kinked.
DOWNTOWN 125i
