KC0056A
4. Dry the element.
5. Put the element in a plastic bag; then pour in air
filter oil and work the oil into the element. Insert
the forming spring into the element with the
closely wrapped end of the spring toward the open
end of the element.
2
CAUTION
KC147
2. Remove the foam filter element from the air filter
housing and separate the foam element from the
spring.
KC148
A torn air filter element can cause damage to the ATV
engine. Dirt and dust may get inside the engine if the
element is torn. Carefully examine the element for
tears before and after cleaning it. Replace the element
with a new one if it is torn.
6. Clean any dirt or debris from inside the air cleaner.
Be sure no dirt enters the carburetor (if equipped).
7. Place the filter assembly in the air filter housing
making sure it is properly positioned and properly
seated with the filter element straight in the hous-
ing.
CAUTION
KC147
KC143
3. Fill a wash pan larger than the element with a non-
flammable cleaning solvent; then dip the ele-
ment in the solvent and wash it.
Failure to properly seat and align the filter element
may cause severe engine damage.
8. Install the air filter housing cover and secure with
the locking tabs.
KC143
2-5
Summary of Contents for MXU 450i
