Section 7 COPIER MANAGEMENT
7-7
7
Press the Enter key.
8
Use the numeric keys on the keypad to enter the new copy
limit for that department code.
The copy limit can be set to any 1 page increment between
1 and 999,999.
NOTE
Enter “0” if you want to enable unlimited copying under that
department code.
9
Press the Enter key.
The display will return to the screen in step 6.
NOTE
If you want to change the copy limit for another department code,
repeat steps 6 through 9.
10
Press the Stop/Clear key.
The message display will return to the screen in step 4.
11
Use the
M
cursor key to select “
z
End” and then press the
Enter key.
The message display will return to the screen in step 2.
Inch specifications
Metric specifications
12
Use the
M
cursor key to select “
z
End” once again and then
press the Enter key.
The message display will return to the “Ready to copy.”
screen.
Inch specifications
Metric specifications
●
Clearing copy counts
1
Display the “Copy Management” screen. (See page 7-3.)
2
Use the
M
cursor or the
N
cursor key to select
“
x
Management Setting” [“
x
COPY MGMT SETTING”].
Inch specifications
Metric specifications
3
Press the Enter key.
4
Use the
M
cursor or the
N
cursor key to select “
b
Delete
Count” [“
b
COUNTS CLEAR”].
Inch specifications
Metric specifications
5
Press the Enter key.
Inch specifications
Metric specifications
Summary of Contents for KM-C830
Page 18: ...2 1 Section 2 NAMES OF PARTS 1 Main body fi fl 9 1 3 8 56 7 0 4 2 ...
Page 160: ...A1 ...
