3-21
Sending Faxes > FAX TX Report
FAX TX Report
You can check whether FAX was transmitted properly by printing the report after transmission.
Density
Adjust density.
(
Value
: [
-4
] to [
+4
] (Lighter to Darker)))
Duplex (Only on models with a duplex scanning function.)
Select the type and orientation of the binding based on the original.
Item
Description
Off
Does not print reports.
On
Prints reports.
Error Only
Prints reports only if an error occurs.
NOTE
This setting is displayed if FAX TX Result Reports is set to [
Specify Each Job
].
Send Result Reports (page 7-4)
Item
Value
Description
1-sided
―
Disables the function.
2-sided
―
Select the [
OK
] key to scan the original with the default setting.
For the default settings, refer to the following:
Machine’s
Operation Guide
Orig. Binding
Left/Right, Top
Select [
Detail
] to display the [
Orig. Binding
] screen.
Select the binding direction of originals, and select the [
OK
]
key.
Orig. Orientation
Top Edge Top, Top Edge Left
Select the orientation of the original document top edge to
scan correct direction, and select the [
OK
] key.
Summary of Contents for 1102S13NL0
Page 190: ......
Page 191: ...First edition 2016 6 2S4KDEN500...