KYOCERA Corporation
6274 SERIES INSTRUCTION MUNUAL
No.205-03-200
106-03-004
PAGE 3/6
3.適用
FPC
寸法
Dimensions of the applicable FPC
0.5mmピッチFPCコネクタの開発にあたり、当社では一列接触を採用し、奇数極、偶数極の接触性能の
バラツキ及びFPC挿抜時の導体けずれを防止し、また、外形寸法の小型化を実現しています。
The single-row contact structure prevents the dispersion of contact reliability between odd-number and
even-number pins and damage of conductor of FPC’s as well as realizes the miniaturization of the outer
dimensions.
ピッチ0.5mmで一列接触を行う為にはFPC、コネクタとも高い精度が要求され、開発時には各FPCメーカの
技術協力のもと現在下記に示す2通りの推奨FPC寸法を用意しています。
尚、この2種類以外のFPCに関しては嵌合ずれの危険が有りますので使用は避けて下さい。
In order to achieve assured single-row contact of pins with 0.5mm-pitch, high accuracy is required for both
of FPC’s and connectors. With the collaboration of FPC manufactures, two types of dimensions for FPC
are recommended as shown below.
Please do not use FPC’s with other dimensions than these two types, for connection may not be done
appropriately.
FPC とのマッチング(FPC 寸法との比較)
Applicable dimensions of FPC