Advanced
9-13
KX Driver
Available background pattern choices are:
Overprint
Select
Overprint
to print the security watermark over the document content, leaving
the content visible. The effect is the security watermark seems blended in with the
document content. This is useful for applications such as Microsoft Power Point and
Internet Explorer, where the document content fills the entire page. If the
Overprint
check box is cleared, the security watermark is covered with the document content.
In the
Device Settings,
PDL Settings
dialog box, if
GDI compatible mode
is
selected, then Overprint is selected automatically.
Adjust Calibration
Use this option to set and make adjustments to the
Pattern shading
and
Text
contrast
for each individual security watermark. You can print sample calibrations to
help you determine the appearance of the security watermark.
The quality and effectiveness of the printed and photocopied security watermark is
dependent on the particular printing system and the settings used. Before printing a
security watermark it is necessary to adjust the calibration, and then print calibration
pages.
Calibration should be adjusted (and calibration pages printed) under these
circumstances:
•
Before using the Security Watermark feature the first time for each standard or
custom security watermark.
•
When the toner is replaced.
•
After periods of heavy printing activity.
•
When the physical printing device is replaced.
•
After changing the background pattern.
•
For color models, you must also make adjustments to the calibration if you
change the
Watermark color
. The
Pattern Shading
and
Text contrast
values
of the previously selected color may not produce the best results with a newly
selected color.
1
Click
Adjust Calibration
to open the
Calibration Adjustments
dialog box.
1
2
Pattern shading:
Select
Light
,
Normal
, or
Dark
from the list for the shading density
to apply to the pattern background. The default is
Normal
.
2
•
Wave
•
Tile
•
Leaf
•
Plaid
•
Diamond
•
Square
•
Lattice
•
Crystal
