Printing Basics
User Guide
3-11
•
When using a network port, select
Enable manual duplex on network port
in
the
Compatibility Settings
dialog box, accessed from the
Device Settings
tab.
Manual Duplex cannot be used on a network port in Windows 9x. See
Compatibility Settings
on page 2-14 for instructions on changing compatibility
settings.
•
The
Source
selection must be
Cassette 1
or
Cassette 2
.
Print on Both Sides
1
In the
Basic
tab, select Cassette 1 or Cassette 2 from the
Source
list.
1
2
Select the
Print on both sides (manual duplex)
check box.
2
3
Select
Flip on Long Edge
or
Flip on Short Edge
.
3
4
Select
Print manual duplex instructions
to print an instruction sheet. Follow the
printed instructions for placing the pages back into the cassette after the first side is
printed.
4
- OR -
