Finishing
5-4
KX Driver
•
If the document data is small enough that it will not extend beyond the edge of
the paper when the gutter is increased, clear the
Reduce image to fit
check
box.
When you want to change the page size (for example, to enlarge an A4-size
brochure for printing on A3 paper), refer to
Print Sizes
on page 3-3.
Staple
The
Staple
feature is available on printing systems with an optional finishing device
installed. If a Booklet stitcher is installed, the
Booklet
printing feature is available.
For further details, refer to
Booklet
on page 4-1.
After installation, optional equipment must be selected in the printer driver in the
Device Settings
tab. For further details, refer to
Installing Optional Devices
on
page 2-1.
Note: Staple
and
Separation
features cannot be used together.
If
Printer default
is selected as the
Destination
in the
Basic
tab, the selection of an
option in the
Finishing
tab results in the automatic selection of a destination
compatible with that finishing option. The destination is automatically updated to the
first available output tray that supports the selected finishing option.
Staple
,
Punch
, and
Separation
>
Offset jobs
each select the Destination
automatically. If
Staple
>
Booklet [fold]
is selected,
Booklet
in the
Layout
tab is
also automatically selected. If he finishing option is changed, the
Destination
selection will not be affected.
Using the Stapler
1
From the application’s
dialog box, open
Properties
. (Select
from the
File
menu, and select
Properties
.)
1
