Kyocera DC 2120 Operation Manual Download

Page: 84 / 220

Various Functions of this Fax

3-16

Press the

key or the

key to select the document

number that corresponds to the communication you
want to modify.

Press the

Enter

key. The items available for modification will appear in the message display.

Changing the scheduled start time

If you want to change the scheduled start time, press
the

key or the

key to select

TX Time

. Then press

the

Enter

key.

If you DO NOT want to change the start time, this step
is not necessary. Proceed to step 9.

Use the keypad to enter the desired time for the
communication to begin.

If you want to reset the displayed time to “00:00”,
simply press the

Stop/Clear

key.

Press the

Enter

key. The new time for the communication to begin will be registered.

If you are finished modifying the contents of the communication, proceed to step 38.

Adding fax numbers

Press the

key or the

key to select

Broadcast

List

and press the

Enter

key.

If you want to add fax numbers, press the

key or the

key to select

Add destination

[

Add

attention]

If you DO NOT want to add fax numbers, this step is
not necessary. Proceed to step 19.

Press the

Enter

key.

Enter the additional fax number.

If you want to designate the communication for this fax
number as a Subaddress Communication, press the

Sub-Address

key.

If you DID NOT press the

Sub-Address

key, proceed

to step 16.

:26585632

Doc # :003

Program/Change:List

22:22 Send

P01

Program/Change TX:

End

:26585632

TX Time

:22:22

TX Time:22:22

Enter TX Time

Program/Change Broadcast:

End

TX Time

:22:22

Broadcast List

Broadcast List:

End

Add destination

Change/Delete

Enter Fax No.

Summary of Contents for DC 2120





























































































































































































































Search results

Summary of Contents for DC 2120

Reviews:

Related manuals for DC 2120

Brands by name

Popular brands

Kyocera DC 2120, Operation Manual

Search results

Summary of Contents for DC 2120

Reviews:

Related manuals for DC 2120

Brands by name

Popular brands