User Guide
55
Network
Data and fax calls
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
Note:
To purchase a cable, visit
www.kyocera-wireless.com/store
.
To enable data/fax mode, select
Menu
>
Settings
>
Network
>
Data/Fax Calls
and of
the following:
•
Voice Only
turns data/fax mode off.
•
Fax, next call
or
Data, next call
sets the
phone to data/fax mode for the next incoming
call or the next ten minutes.
•
Fax, until off
or
Data, until off
sets the
phone to data/fax mode until the phone is
turned off.
Privacy alert
You set your phone to alert you when enhanced
digital CDMA privacy is lost or regained. Select
Menu
>
Settings
>
Network
>
Privacy Alert
>
Enabled
.
Voice privacy
Set your phone to use enhanced digital CDMA
privacy. Select
Menu
>
Settings
>
Network
>
Voice Privacy
>
Enhanced
.
Data setup
Set your phone’s connection type for data
applications. Select
Menu
>
Settings
>
Network
>
Data Setup
and one of the following:
•
Automatic
select the best connection type
based on your service.
•
QNC Only
allows only standard circuit-
switched calls.
•
1XRTT Only
allows the use of high-speed
packet data.
User name
Allows you to set a user name and password if
your phone is data enabled.
1.
Select
Menu
>
Settings
>
Network
>
User Name
.
2.
Enter or modify your user name. Select
Next
.
3.
Enter or modify your password. Select
Done
.
Roaming service alert
Use this setting if you want the phone to alert you
when you roam outside of your home service area.
Select
Menu
>
Settings
>
Network
>
Roam/Svc Alert
and one of the following:
•
Disabled
turns roaming service alert off.