Kyocera DF-780(B), Operation Manual

Types of modes [printer]

Offset ejection

This mode automatically shifts each set of 

printouts to the right and left in order to 

separate each individual set in a staggered 

fashion.

The following paper sizes can be used in 

Offset:Each Set, Each Page Mode

:

11" × 17", 8

1/2

" × 14", 8

1/2

" × 13

1/2

", 8

1/2

" × 

13", 8

1/2

" × 11", 11" × 8

1/2

", 7

1/4

" × 10

1/2

", A3, 

B4, A4, A4R, B5, B5R, 8K or 16K.

Stapling

This mode automatically staples each set of 

printouts.

Troubleshooting

(Paper jam, replenishing staples and

 staple jam)

Handling a paper jam

If a paper jam happens to occur, the operation 

will stop, and an indication of the cause of the 

jam will appear on the operation panel of the 

copier (or the message display of the printer).

1. Push the finisher release button to 

separate the Document Finisher from the 

copier (or printer).

2. Remove any jammed paper there.

3. Open the top cover and remove any 

jammed paper inside that cover.

4. Check the lower portion of the Document 

Finisher (A) and remove any jammed paper 

from that area.

D

C

B

A

D

C

B

A

D

C

B

A

D

C

B

A