2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-4-10
(2) Items and corrective actions relating to the device that will cause paper jam
Jam types
Check description
Corrective measures
No-paper-feed jam or
the leading edge of
paper is curled back at
the position of the
roller
(J0501,J0502,
J0503,J0504, J0509)
1. Check if the jammed
paper or the printed
paper has a tear
caused by the roller at
its leading edge.
Replace the paper feed roller.(Service life of rubber
roller is 150k.)
Increase the spring pressure to pinch the separation
rollers if the component is undue to its expected
life.Replace the spring.
2. Check abrasion and
paper dusts on the feed
roller and forward
rollers.
Clean the paper feed roller and the pickup roller. Or, if
not amended, replace.
3. Perform U032 to check
the pickup roller and
paper feed roller are
rotating.
If disconnected or or stained, replace the primary
paper feed clutch.
4. Check that the
conveying force of the
pickup roller is
sufficient.
Increase the conveying force during paper pickup by
increasing the spring load of the pickup roller.
5. Check the film is
sufficiently protruded in
front of approching the
feed roller and the
nip.(Too wide a gap
against the feed roller.)
Amount of protrusion of film in approaching (Gap: 0.2
- 0.5 mm) must be maintained after adjustment.
6. Check the separation
roller is not disturbed as
a driving component is
in contact with the
frame during the
separation roller is in
motion.
If it gets in contact, replace the primary paper feed
unit.
7. Depress the release
lever to release the
pressure of the primary
feed rollers to check
that the retard holder
falls.(The pressure by
the retard roller to the
feed roller is
decreased.)
Modify mounting the retard holder fixing plate.
Summary of Contents for DP-480
