Sprint Direct Connect
42
Call Alert
Group Connect Call
TeamDC Call,
Opt-In TeamDC Call
Group Connect Invite
Opt-In TeamDC Invite
2. Highlight a Direct Connect entry and press and release the DC button.
3. Continue the Direct Connect call as described previously.
Tip:
To redial your most recent Direct Connect call, press and hold the DC button.
Make a Direct Connect Call Using a Speed Dial Number
Place a Direct Connect call to the Direct Connect numbers assigned to speed dial locations.
► From standby mode, enter a speed dial number and press the DC button.
To assign a Direct Connect number to a speed dial location, see
Assign Speed Dial Numbers
.
Make a Direct Connect Call With the Phone Closed
You can make a Direct Connect call with the phone closed.
1. Press and hold the external speaker button to unlock the keyguard if the buttons are
locked. See
Keyguard
.
2. Press and hold the external speaker button until you see
―DC Speaker mode on‖ on the
external display.
3. Press and release the DC button to display the History on the external display.
4. Use the volume button to scroll through the list and highlight an entry.
5. Press and hold the DC button to begin talking.
Tip:
If you see the incoming caller
‘s information on the external display, but you cannot hear
the caller, the audio is being routed to the internal speaker. Press the external speaker
button again to route the conversation to the external speaker.
6. Press the call list button to finish the Direct Connect call.