Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 104 / 454

3-12

Basic Operation

Duplex Copying

Produce two-sided copies. The following duplex options are available.

You can also create single-sided copies from two-sided originals or originals with facing pages such as books. The
following modes are available.

One-sided to Two-sided

Produces two-sided copies from one-sided originals. In case
of an odd number of originals, the back side of the last copy
will be blank.

The following binding options are available.

Binding Left/Right

: Images on the second sides are not

rotated.

Binding Top

: Images on the second sides are rotated

180°. Copies can be bound on the top edge, facing the
same orientation when turning the pages.

Two-sided to One-sided

Copies each side of a two-sided original onto two individual
sheets.

The following binding options are available.

•

Binding Left/Right

: Images on the second sides are not

rotated.

•

Binding Top

: Images on the second sides are rotated

180°.

Two-sided to Two-sided

Produces two-sided copies from two-sided originals.

NOTE:

The paper sizes supported in Two-sided to Two-

sided are Legal, Letter, Oficio II, Executive, A4, B5, A5 and
Folio.

Original

Copy

ghi

def

abc

ghi

abc

def

ghi

abc

def

Original

Copy

Original

Copy

Original

Copy

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands