Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 118 / 454

3-26

Basic Operation

Specifying Destination

When specifying destination, choose from the Address Book or use the One-touch keys.

Choosing from the Address Book

Select a destination registered in the Address Book.

In the basic screen for sending, press the

Address

Book

key. The Select Addr Book menu appears.

Press the

key to select [Address Book] and then

press the

key. Address Book appears.

To use an address book on the LDAP server, select [Ext
Address Book].

NOTE:

If extended address book is not registered, [Select

Addr Book] is not displayed.

Press the

key to select the desired user or group,

and then press the

key.

If you select a user, the list of destinations registered to
the user appears.

If you select a group, proceed to step 5.

Press the

key to select the desired destination

and then press the

key.

Completed.

is displayed and the screen returns to the

basic screen.

Destination Search

Destinations registered in the Address Book can be searched.

The procedures for using the different search modes are explained below.

Select Addr Book:

*********************

Ext Address Book

[ Exit

]

Address Book

Address Book:

*********************

Fiala

Maury

[ Menu

]

Design

Fiala:

*********************

fiala@###########.

SMB-PC

[ Menu

]

0667640000

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands