Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 178 / 454

6-12

Document Box

Press the

key. The file print and delete selection

menu appears.

Press the

key to select [Print] and press the

key.

NOTE:

To delete the selected file without printing it, select

[Delete] and press the OK key. The file deletion confirmation
screen appears. Press [Yes] (the

Left Select

key).

Completed.

appears and the file is deleted.

The number of copies screen appears. Set the number
of copies and press the

key.

The file print confirmation screen appears. Press [Yes]
(the

Left Select

key).

Accepted

appears and printing

begins.

Fiala:

*********************

Delete

Copies

(1 - 999,---)

**********

copies

---

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands