Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 232 / 454

8-34

Default Setting (System Menu)

A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the

Right Select

key).

The Timer Settings menu appears.

Press the

key to select [Err. Clear Timer].

Press the

key. Err. Clear Timer appears.

Press the

key to set the Error Clear Timer. Set

the amount of time before clearing errors in seconds.
You cannot use the numeric keys to enter this value.

Press the

key.

Completed.

is displayed and the

screen returns to the Timer Settings menu.

Auto Sleep

If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to

Sleep and Auto Sleep on page 2-

for Sleep Mode.

•

Auto Sleep ON/OFF

Select whether to use Auto Sleep or not. The default setting is

On.

NOTE:

Time remaining before Auto Sleep can be modified as necessary.

Use the procedure below to specify the auto sleep setting.

In the Sys. Menu/Count. menu, press the

key to

select [Common Settings].

*******************

[ Login

]

Timer Setting:

*********************

Sleep Timer

PanelReset Timer

[ Exit

]

Err. Clear Timer

Err. Clear Timer:

(5 - 495)

******30*

sec.

Sys. Menu/Count.:

System

User/Job Account

*********************

[ Exit

]

Common Settings

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands