Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 237 / 454

8-39

Default Setting (System Menu)

Press the

key. Panel Reset Timer appears.

Press the

key to set the Panel Reset Timer. Set

the amount of time before resetting the message display
on the panel in seconds. You cannot use the numeric
keys to enter this value.

Press the

key.

Completed.

is displayed and the

screen returns to the Timer Settings menu.

Low Power Timer

You can specify the amount of time to wait before Low Power Mode.
Specify a value from 1 - 240 minutes (1 minute increments). The default setting is

minutes.

For more information on Low Power Mode, refer to

Auto Low Power Mode on page 2-8

Use the procedure below to set the Low Power Mode.

In the Sys. Menu/Count. menu, press the

key to

select [Common Settings].

Press the

key. The Common Settings menu appears.

Press the

key to select [Timer Setting], and press

the

key.

A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the

Right Select

key).

The Timer Settings menu appears.

PanelReset Timer:

(5 - 495)

******90*

sec.

Sys. Menu/Count.:

System

User/Job Account

*********************

[ Exit

]

Common Settings

Common Settings:

*********************

Default Screen

Sound

[ Exit

]

Language

*******************

[ Login

]

Timer Setting:

*********************

Sleep Timer

PanelReset Timer

[ Exit

]

Err. Clear Timer

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands