Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 268 / 454

8-70

Default Setting (System Menu)

Auto Paper Selection

If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom changes. The table below
shows the available settings.

Use the procedure below to specify the action performed for Auto Paper Selection.

In the Sys. Menu/Count. menu, press the

key to

select [Copy].

Press the OK key. The Copy menu appears.

Press the

key to select [AutoPaperSelect.].

Press the

key. AutoPaperSelect. appears.

Press the

key to select [MostSuitableSize] or

[Same as OrigSize].

Press the

key.

Completed.

is displayed and the

screen returns to the Copy menu.

Item

Description

MostSuitableSize

Select paper based on the current zoom
and the size of the original.

Same as OrigSize

Select paper that matches the size of the
original, regardless the zoom.

Sys. Menu/Count.:

User/Job Account

Common Settings

*********************

[ Exit

]

Copy

Copy:

*********************

Paper Selection

AutoPaperSelect.

[ Exit

]

Photo Processing

AutoPaperSelect.:

*********************

Same as OrigSize

*MostSuitableSize

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands