Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 275 / 454

8-77

Default Setting (System Menu)

Press the

key. Alt. Emulation appears.

Press the

key to select the printer for alternative

emulation.

Press the

key. KPDL Error Rpt appears.

Press the

key to select [Off] or [On].

Press the

key.

Completed.

is displayed and the

screen returns to the Printer menu.

EcoPrint

EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a problem.

Use the procedure below to specify the EcoPrint setting.

In the Sys. Menu/Count. menu, press the

key to

select [Printer].

Press the

key. The Printer menu appears.

Press the

key to select [EcoPrint].

Press the

key. EcoPrint appears.

Press the

key to select [Off] or [On].

Alt. Emulation:

DIABLO 630

EPSON LQ-850

*********************

*PCL6

KPDL Error Rpt:

Off

*********************

*On

Sys. Menu/Count.:

Common Settings

Copy

*********************

[ Exit

]

Printer

Printer:

*********************

EcoPrint

Override A4/LTR

[ Exit

]

Emulation Set.

EcoPrint:

*********************

*Off

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands