Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 276 / 454

8-78

Default Setting (System Menu)

Press the

key.

Completed.

is displayed and the

screen returns to the Printer menu.

Override A4/LTR

Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table below
shows the available settings.

Use the procedure below to specify the override A4/Letter setting. The default setting is

In the Sys. Menu/Count. menu, press the

key to

select [Printer].

Press the

key. The Printer menu appears.

Press the

key to select [Override A4/LTR].

Press the

key. Override A4/LTR appears.

Press the

key to select [Off] or [On].

Press the

key.

Completed.

is displayed and the

screen returns to the Printer menu.

Item

Description

A4 and Letter are regarded as the same in
size. The machine will use whichever size
is in the paper source.

Off

A4 and Letter are not regarded as the
same in size.

Sys. Menu/Count.:

Common Settings

Copy

*********************

[ Exit

]

Printer

Printer:

*********************

EcoPrint

Override A4/LTR

[ Exit

]

Emulation Set.

Override A4/LTR:

Off

*********************

*On

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands