Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 298 / 454

8-100

Default Setting (System Menu)

Press the

key.

Completed.

is displayed and the

screen returns to the Send/Box Density menu.

Correct. Bk Line

Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the
document processor used.

The table below shows the available settings.

NOTE:

Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to keep the

default ([Off]).

Use the procedure below to specify the setting for correcting fine black lines.

In the Sys. Menu/Count. menu, press the

key to

select [Adjust/Maint.].

Paper feed
direction

Item Description

Off

No correction performed.

On(Low)

Correction performed. The reproduction of
the image becomes lower when using Off.

On(High)

Correction performed. Select this item if
black streak remains after using On (Low).
The reproduction of the image becomes
lower when using On (Low).

Sys. Menu/Count.:

Document Box

;

Edit Destination

*********************

[ Exit

]

Adjust/Maint.

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands