Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 309 / 454

8-111

Default Setting (System Menu)

Press the

key. The Edit Destination menu appears.

Press the

key to select [Address Book].

Press the

key. The Address Book list screen

appears.

Press [Menu] (the

Right Select

key). Menu appears.

Press the

key to select [Add Address].

Press the

key. Add Address appears.

Press the

key to select [Group].

Press the

key. This displays the screen for editing

groups.

NOTE:

If the maximum number of groups has already been

registered, the screen will display

Registered numbers

exceeded.

and return to the Address Book.

Enter each item and then press the

key.

Registered.

is displayed and the screen returns to the Address Book
list screen.

Refer to the descriptions below for how to enter each
item.

Edit Destination:

*********************

Print List

[ Exit

]

Addressbook

Addressbook:

*********************

Fiala

Maury

[ Menu

]

Design

Menu:

Detail/Edit

Delete

*********************

Add Address

Add Address:

Contact

*********************

*Group

Detail:

Group Name:

1/4

Sales Section

[ Edit

]

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands