Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 330 / 454

8-132

Default Setting (System Menu)

Press the

key. NetWare appears.

Press the

key to select [On] or [Off].

If you select [On] and press the

key, Frame Type

appears. Press the

key to select the desired

frame type.

The available frame types are as follows:

Auto
802.3
Ether-II
802.2
SNAP

Press the

key.

Completed.

is displayed and the

screen returns to the Network Setting menu.

For detailed information on restarting the system, refer to

Restarting the System on page 8-119

AppleTalk Setup

Select the Apple Talk network connection. The default setting is

Use the procedure below to setup the AppleTalk setting.

In the Sys. Menu/Count. menu, press the

key to

select [System], and press the

key.

A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the

Right Select

key).

The System menu appears.

NetWare:

*********************

*Off

Frame Type:

*********************

802.3

Ether-II

*Auto

Sys. Menu/Count.:

Report

Counter

*********************

[ Exit

]

System

*******************

[ Login

]

System:

*********************

I/F Block Set.

Security Level

[ Exit

]

Network Setting

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands