Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 347 / 454

8-149

Default Setting (System Menu)

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.

The following interface block settings are available:

• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)

USB Host (USB memory slot setting)

This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is

Unblock

Use the procedure below to specify the USB Host setting.

In the Sys. Menu/Count. menu, press the

key to

select [System], and press the

key.

A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the

Right Select

key).

The System menu appears.

Press the

key to select [I/F Block Set.].

Press the

key. The I/F Block Set. menu appears.

Press the

key to select [USB Host].

Sys. Menu/Count.:

Report

Counter

*********************

[ Exit

]

System

*******************

[ Login

]

System:

Network Setting

*********************

Security Level

[ Exit

]

I/F Block Set.

I/F Block Set.:

*********************

USB Device

Option I/F

[ Exit

]

USB Host

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands