Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 388 / 454

11-8

Management

Press the

key to select [Exit] and then press the

key.

Select [Detail] and press the

key to see information

of the registered users.

In Local User List, press the

key to select the

added user and then press the

key.

Press the

key to select [Login Password:], press

[Edit] (the

Right Select

key), enter the login password,

and then press the

key.

Enter the same login password to confirm and press the

key.

Press the

key to select [E-mailAddress:], press [Edit]

(the

Right Select

key), enter the e-mail address, and

then press the

key.

Press the

key to select [Access Level:], press

[Change] (the

Right Select

key), select the user access

privilege, and then press the

key.

NOTE:

If the user list is for device administrator, [Change]

is not displayed.

Press the

key to select [Account Name:], press

[Change] (the

Right Select

key), select the account, and

then press the

key.

NOTE:

If the user list is for device administrator and the

device administrator does not log in, [Change] is not
displayed.

After entering the user information, press the

key

again.

Registered.

is displayed and the screen returns to Local

User List.

User01:

*********************

Detail

Exit

Local User List:

DeviceAdmin

Admin

*********************

[ Menu

]

User 1

Detail:

3/6

OOOOOOOOOOO

[ Edit

]

Detail:

E-mailAddress: 4/6

******@abcdef.jp

[ Edit

]

Detail:

Access Level:

5/6

Administrator

[ Change ]

Detail:

Account Name:

6/6

RD Center

[ Change ]

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands