Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 414 / 454

11-34

Management

Press the

key. The Each Job Accounting menu

appears.

Press the

key to select the account of which you

want to check counts.

Press the

key. A menu for the account appears.

Press the

key to select the function of which you

want to check counts, and then press the

key.

If you select [Printed Pages], select the item for which
you want to check printed page counts, and then press
the

key. Press the

key to switch the counted

items.

If you select [Scanned Pages], press the

key to

switch the counted items.

If the number of output sheets is restricted by an account
management function, the upper limit on the number of
output sheets is also displayed.

After confirming the content, press the

key. The

screen returns to the menu for the account.

To reset the counter, press the

key to select

[Counter Reset].

Press the

key. A confirmation screen appears.

Press [Yes] (the

Left Select

key). The counter is reset.

Completed.

is displayed and the screen returns to the

menu for the account.

Each Job Account:

*********************

RD Center

UI R&D DEPT.

GUI DESIGN

GUI DESIGN:

*********************

Scanned Pages

FAX TX Pages

[ Exit

]

Printed Pages

FAX TX Pages:

FAX:

1/3

1234567
Limit:1234567

GUI DESIGN:

Printed Pages

Scanned Pages

*********************

[ Exit

]

Counter Reset

Reset counter.
Are you sure?

GUI DESIGN

[

Yes

] [

]

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands