Kyocera ECOSYS FS-3040MFP+ Operation Manual Download

Page: 96 / 454

3-4

Basic Operation

ID Card Copy

is printed on the

Program 1

key. When the

functions are deleted by overwriting

Program 1

key, seal

the label supplied with the machine and write the function
name in it.

Registering Settings

After making settings, press and hold the one of the

Program

keys where you want to register the settings for 3

seconds. The current settings are registered to the selected
program key.

Changing and Deleting Settings

Press and hold the one of the

Program 1

keys

where the settings you want to change/delete are
registered for 3 seconds. Menu appears.

To replace the registered settings with the current
settings, press the

key to select [Overwrite] and

then press the

key. A confirmation screen appears.

Press [Yes] (the

Left Select

key) to change the settings.

To delete the registered settings, press the

key

to select [Delete] and then press the

key. A

confirmation screen appears. Press [Yes] (the

Left

Select

key) to delete the registered settings.

Recalling Settings

Press the one of the

Program 1

keys where the settings you want to recall are registered. The current settings

of various functions are replaced with the registered settings.

Registered.

Program 1

Menu:

*********************

Delete

Overwrite

Overwrite.
Are you sure?

Program 1

[ Yes ] [ No ]

Delete.
Are you sure?

Program 1

[ Yes ] [ No ]

Summary of Contents for ECOSYS FS-3040MFP+







































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands

Kyocera ECOSYS FS-3040MFP+, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3040MFP+

Reviews:

Related manuals for ECOSYS FS-3040MFP+

Brands by name

Popular brands