Kyocera ECOSYS M3860idn Operation Manual Download

Page: 237 / 483

5-46

Operation on the Machine > Using a Custom Box

Deleting Documents in Custom Box

Display the screen.

Select [

Custom Box

] on the Home screen > Select the box.

Delete the document.

Select the document in the list that you want to delete by selecting the checkbox.

The document is marked with a checkmark.

[

] > [

Yes

]

The document is deleted.

Printing Documents in Custom Box

Display the screen.

Select [

Custom Box

] on the Home screen > Select the box containing the document you want

to print

Print the document.

Select the document you wish to send by checking the checkbox.

The document is marked with a checkmark.

Select [

Print

Set the paper selection, duplex printing, etc., as desired.

For the features that can be set, refer to the following:

Press the [

Start

] key.

Printing of the selected document begins.

NOTE

If a custom box is protected by a password, enter the correct password.

NOTE

• You cannot select [

] without first selecting a document.

• To cancel a selection, select the checkbox again so that it is no longer ticked.

NOTE

If a custom box is protected by a password, enter the correct password.

NOTE

To cancel a selection, select the checkbox again so that it is no longer ticked.

Printing Documents (page 6-7)

Summary of Contents for ECOSYS M3860idn




































































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS M3860idn

Reviews:

Related manuals for ECOSYS M3860idn

Brands by name

Popular brands

Kyocera ECOSYS M3860idn, Operation Manual

Search results

Summary of Contents for ECOSYS M3860idn

Reviews:

Related manuals for ECOSYS M3860idn

Brands by name

Popular brands