8-35
Setup and Registration (System Menu) > System Menu
IPP
-
Protocol Setting
Selects whether to receive documents using IPP. To use the IPP protocol, select [
Not Secure
(IPP&IPPS)
] on IPP Security under Security Settings from the Command Center RX.
Value
: Off, On
Port Number
Set the IPP default Port Number. The default port number is 631.
Value
: 1-32767
NOTE
This function is displayed when [
Protocol Setting
] is set to [
On
].
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value
: Disable, Enable
NOTE
This function is displayed when [
Protocol Setting
] is [
On
] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
Available Network
(Wired Network)
IPP over SSL
-
Protocol Setting
Select whether or not to use IPP over SSL.
Value
: Off, On
NOTE
When selecting [
On
], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Port Number
Set the IPP over SSL default Port Number. The default port number is 443.
Value
: 1-32767
NOTE
This function is displayed when [
Protocol Setting
] is set to [
On
].
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value
: Disable, Enable
NOTE
This function is displayed when [
Protocol Setting
] is [
On
] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
Available Network
(Wired Network)
RAW Port
-
Protocol Setting
Select whether to receive documents using RAW Port.
Value
: Off, On
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value
: Disable, Enable
NOTE
This function is displayed when [
Protocol Setting
] is [
On
] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
Available Network
(Wired Network)
Item
Description
Summary of Contents for ECOSYS M3860idn
