Kyocera ECOSYS M3860idn Operation Manual Download

Page: 373 / 483

9-23

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Guest Property

The table below explains the user information to be registered.

Item

Descriptions

User Name

Enter the name displayed on the user list (up to 32 characters).
The default setting is "Guest User".

Access Level

The authority of the user appears. This cannot be changed.

Account Name

Add an account where the user belongs.
If the user does not belong to any account, select [Other].

Authorization Rules

Set usage authority for each user.
The items you can restrict the access level with are as follows.

Printer:

Select whether or not use of the print function of the printer is prohibited.
Applicable print functions are as follows:
•

Print from Box

•

Print from USB Drive

•

Print Report

Copy:

Select whether or not use of the copy print function is prohibited.

Duplex Restriction:

Select whether only duplex printing is allowed.

Combine Restrict.:

Specify whether only Combine is allowed.

EcoPrint Restriction:

Specify whether only EcoPrint is allowed.

Send:

Select whether or not use of the send function is prohibited.

FAX TX Restriction:

Select whether or not use of the fax send function is prohibited.

Storing in Box:

Select whether or not use of the box store function is prohibited.

Storing in Memory:

Select whether or not use of the USB drive store function is prohibited.

Summary of Contents for ECOSYS M3860idn




































































































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS M3860idn

Reviews:

Related manuals for ECOSYS M3860idn

Brands by name

Popular brands

Kyocera ECOSYS M3860idn, Operation Manual

Search results

Summary of Contents for ECOSYS M3860idn

Reviews:

Related manuals for ECOSYS M3860idn

Brands by name

Popular brands