10-23
Troubleshooting > Troubleshooting
N
P
Memory is full.
*1
—
The process cannot be performed
due to insufficient memory. The job
is canceled. Select [
End
].
The machine may reproduce the
same originals by arranging the
following setting:
•
Decrease [
Image Quality
] of
[
File Format
].
—
—
Unable to continue the job as the
memory is used up. Select
[
Continue
] to print the scanned
pages. The print job cannot be
processed completely. Select
[
Cancel
] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Select [
On
] of RAM Disk Setting
in System Menu, and then
decrease the RAM disk size.
•
Select [
Printer Priority
] of
Optional Memory in System Menu.
NOTE
Before changing the RAM Disk
Setting or Optional Memory setting,
contact your administrator.
—
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Message
Checkpoints
Corrective Actions
Reference
Page
Non-genuine Toner.
Is the installed toner container our
own brand?
We will not be liable for any damage
caused by the use of third party
supplies in this machine.
—
Message
Checkpoints
Corrective Actions
Reference
Page
Paper jam.
―
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instruction to remove the
jammed paper.
Preparing to print.
―
The machine is under the
adjustment to maintain its quality.
Please wait.
—
Print overrun.
—
Warning. Low printer memory. The
job was paused. Re-starting the job.
Select [
Continue
].
—
Message
Checkpoints
Corrective Actions
Reference
Page
Summary of Contents for ECOSYS M3860idn
